Most computers today require an internet connection to do even the smallest of tasks. Some apps work offline too, but eventually you need that Wi-Fi to do everything. Especially at a time when most people's jobs have shifted to telecommuting due to the coronavirus. One of the most common problems that users face is Windows 10 not recognizing the Wi-Fi network. Almost everyone likes computers connected to Wi-Fi for work or play. As a result, if anyone encounters the above problem, they will fall behind in their work and life. That's why we decided to write an article on fixing Wi-Fi problems in Windows 10 at BingMag. So stay tuned for the rest of the article. There are thirteen ways you can test Wi-Fi in Windows 10 that you can test.
Note that some of these ways may not work on your computer system or Do not solve the problem. However, the probability that you will not be able to solve your problem by doing these 13 things is very low.
Now we have to look at these thirteen things, which are:
1) Reset TCP/IP
a) Enter Command Prompt (CMD) in the Start menu. Then select the following option that you see in the picture.
b) Enter the photo.
c) Then close CMD and continue the following steps to troubleshoot network problems.
Enter these two commands one by one. What they will do is release the current IP address assigned by DHCP and assign a new address to it. IP Configuration , run the following commands one by one.
2) Network and Internet Troubleshooting h2>
a) First press the Windows + I buttons to open the settings section. Then you should look for the following options.
- Find and fix network problems
- Find and fix problems with your network adapter
b) The steps are the same for both of the above options. So we will explain one to you with pictures. First select one of the troubleshooting options. Then select Apply repairs automatically and click Next.
After that, instructions Follow what you see, to see if it solves the problem or not. If the problem persists, repeat the same steps for another troubleshooting option.
There is another troubleshooting option that will run if you have the Creators update installed. For some reason, this item is not visible in search results. To set it up, follow these steps:
a) Go to Settings. Select the Update & Security option. Click on Troubleshoot. Now open Internet Connections.
b) Click Run the troubleshooter to start the process And then follow the on-screen instructions.
3) Change the network/SSID and password
We can not provide you with specific steps for this solution , Because these are different depending on the device model and your router model. All you have to do is connect to the Internet via an Ethernet cable. Then enter the IP address of the router in the browser (something like 184.108.40.206) so that you can log in and change the login details quickly. You can also check out the router's manual for more details. The following is:
If you do not know the Wi-Fi password, do not try it at all.
A) Refer to the settings section. Select the Network & Internet option.
b) In the Wi-Fi section, click Manage known networks.
c) Click on your Wi-Fi name and select the Forget option.
b) Now you have to right-click and select Diagnose.
c) If this item has been disabled for some reason, you must re-enable it.
d) If this item does not work, you can use your IP address Manually adjust as well. To do this, select Properties in the same menu instead of Diagnose.
e) Select Internet Protocol version 4 (TCP/IPv4) and click Properties.
Select the "Use the following IP address" option and enter the values. You can also try the following values, which are for Google Public DNS. If all else fails, talk to your ISP.
Save all settings. Then check if your Windows 10 computer can now detect the Wi-Fi network. If all goes well, you can always go back to the default.
Note: Changing the number of users in DHCP can be helpful. The upper limit is 50 and rising may cause various errors. To find out how to change it, you should check your router manual.
6) Disable Firewall or Antivirus
It is very common for your antivirus to crash. The result is a problem connecting the computer to Wi-Fi. To solve this problem, implement the following steps:
a) Open the Control Panel. Find the Windows Defender Firewall and click on it.
b) Left) Select Turn Windows Defender Firewall on or off.
c) You can use Windows Defender Turn off, but do so temporarily until you fix the error.
At this point, sometimes you need to restart your computer.
7) Update network drivers
a) Open the Device Manager option from the Start menu. You can also open it using Windows + X.
b) Double-click Network adapters and right-click the adapter option. Then select Update driver.
8) Bandwidth settings
Some users say that setting bandwidth to Auto has helped them fix Wi-Fi problems in Windows 10. There is no harm in trying this, then do not neglect it.
a) Through the Start menu you can open Network Connections. Right-click on your network name and select Properties. Now you have to click on Configure.
b) You have to set it to Auto. Sometimes this option does not exist. In this case, you should try several options to see if one of them helps. Be sure to check the default settings before making any changes.
It is likely that a large number of routers in Your area has the same bandwidth. As a result, it blocks network waves. Changing the channel can help you in some cases. For reference:
802.11a/ac uses 5 GHz band.
802.11b/g uses 2.4 GHz band.
802.11n uses 2 bands Uses 4. GHz or 5 GHz.
9) Power Management
Power management settings Windows 10 PC may turn off the power supply to save battery power. br /> a) Open Device Manager again from the Start menu and right-click on your network adapter. Then select Properties. Select the Power Management tab this time.
b) Check the "Allow the computer to off this device to" option. Remove "save power" and save the settings. Restart the computer and check again.
10) Delete the WIRELESS profile
An error or bug may have caused the wireless profile to crash.
To solve this problem:
a) Open CMD from the Start menu. If you can, enter the following command. (As photo)
b) Replace your network name with WirelessProfileName and press Enter. When done, you reconnect to your network from the beginning and Windows automatically creates a new profile.
11) Enable SSID publishing
Your router, SSID or network name Spreads to nearby devices so that you can connect your laptop and smartphone to the network.
a) Open a new tab in the browser and the router's IP address, which is usually 198. 168.1.1, open and log in. In some cases, this option is different for your system.
Usually the Enable option You will find SSID Broadcast in the settings section. After saving the settings, you must restart the computer.
12) Turn on the AUTOCONFIG WLAN service
a) Search for and open the Services application.
b) Find WLAN AutoConfig in the list and right-click on it to select Properties. p>
c) Make sure the Startup type is set to Automatic. If necessary, save the changes and restart the computer.
d) Here is a list of other services for We put you. Make sure the following are on your system:
- Network Location Awareness (Automatic)
- Network List Service (Manual)
- Windows Event Log ( Automatic)
- Windows Update (Manual)
13) Turn on NETWORK DISCOVERY
a) First enter the Control Panel section. Then select Network and Internet. Now click on Network and Sharing Center.
Now you need to Change advanced sharing settings Select
c) Network Discovery should be turned on in this section. If it is not clear, do so and save the changes.
In this article, we tried to provide good tricks to solve Wi-Fi problems in Windows. There are many things that can cause problems with your computer's Wi-Fi network. For example, Microsoft has written a short guide for Surface users. If you have one of these, this article is for you. Some of these ways will solve your problem without any hassle and very easily. However, if you can not solve your problem, try all the above ways.
Do you know another way to solve Wi-Fi problems in Windows? Let us know.
Disable these settings in Windows 10 right now