In this article, we will teach you how to change the color of your eyes with Photoshop. To do this, use the Hue/Saturation Adjustment tool. If you have a specific color, you can use it to select it. If you do not have a specific color in mind, you can try different color spectrums with this tool to finally reach your desired color. On the other hand, using this tool does not harm your original photo, because the colors are applied on a separate layer. Therefore, at any stage of the tutorial, even after it is completed, you can still easily access the original version of the photo.
- Step-by-step tutorial on changing hair color in Photoshop >
This tutorial is based on Adobe Photoshop CC. But the different versions of this software are not much different from each other and with all the new versions you can follow these steps. In fact, all versions of Photoshop CS6 can do just that. To learn and master the subject of eye color change with Photoshop, we recommend that you do all the steps and practice with this tutorial.
Basic photo - We use this photo for training
How to change eye color using Photoshop?
Step 1: Zoom in on the eyes
before work Let's start, it is better to zoom in on the eyes to have better access to them. You'll find out a little bit later.
- How to work twice as fast with Photoshop?
Zoom tool from the bottom of the toolbar (on the side Left page) Select. Click a few times on the eyes to zoom in a bit. You can also use the Hand Tool to zoom left and right. This tool is selected by pressing the H button. Adjust the image to the image below.
Zoom in on the eyes and place them in the center of the page
Step 2: Select the Lasso Tool
As you know, we only want to color the eyes in this Change the photo. Therefore, we first need to select them. To do this, we use the Lasso Tool.
Step 3: Make your choice Draw around the eyes
Using this tool, you can draw a line and the entire environment inside the line will be selected. So, gently and carefully, choose around the eyes. Of course, not all of the eye area is needed, and just choosing the iris (round and colored part) of the eye is enough. Do not worry if your choice is not very clean and accurate. We will adjust it in the next steps.
Select the eyes using the Lasso Tool
Once you have selected one eye, it is the next eye's turn. Be sure to press and hold the Shift key before selecting. By doing this, you will see a small + sign next to the Lasso Tool mouse pointer. Holding down the Shift key tells Photoshop that this selection adds a section to the previous selection. If you do not do this, the second selection will be deleted by making the second selection. At the end of this step, both eyes should be selected as shown below.
Press the Shift key and select the other eye
Step 4: Add a Hue/Saturation Adjustment layer
to change the eye color with Photoshop , We must use the Hue/Saturation Adjustment tool. To do this, from the bottom right of the page, in the Layers panel, click on the New Fill or Adjustment Layer icon (as shown).
Click on the New Fill or Adjustment Layer icon
Now select the Hue/Saturation option from the list
Select Hue/Saturation adjustment layer
Step 5: Select the "Colorize" option
After completing the previous step, the Hue/Saturation Adjustment layer options will appear on your Photoshop page. Select the Colorize option as shown below and enable the tick.
Select the Colorize option from the bottom of the panel
As soon as you enable this option, you will notice that your subject's eyes turn red. The color you want is probably not red. So we have to change it.
eye color Turns Red
Step 6: Change eye color Using the Hue Adjuster
Use the Hue section (in the same panel) to select a new eye color. Hue is actually what most of us know as true color. By shaking the values of this section, you will see that the color of the eyes also changes. Hue has different color spectrums. It starts with bold red at the far left and has colors like orange, yellow, green, blue, magenta and on the right. For this tutorial, we set the Hue value to around 20 and choose a nice blue color. But of course you can choose any color you want.
- Step by step tutorial to remove blemishes in Photoshop
Change eye color using the Hue cursor
So far, photo We are as follows. But you have probably noticed that the color intensity is a bit high and full of color. So, in the next step, we adjust the color.
Result of eye color change using Hue change
Step 7: Reduce the saturation value of the new color layer
after applying the desired color using the adjuster Select the hue, move the lower adjustment (Saturation) to the left to reduce the color intensity and make it more natural. A value between 10 and 15 is usually suitable for Saturation.
We reduce the saturation value
The result after decreasing the Saturation value is as follows.
As you can see, the color of the eyes is now more natural
Step 8: Change the Blend Mode to color
Make sure the Hue/Saturation Adjustment layer is on top of the Background layer in the Layers panel. Click on the Hue/Saturation layer. Normally, Blend Mode is set to Normal, meaning that the settings affect not only the color of the eyes, but also the brightness and clarity. We intend that our changes only affect the color of the eye. Therefore, set the Blend Mode to Color. Do this as shown below
Set Blend Mode to color Mode
The difference between the two modes may not be significant. But by doing this (setting the Blend Mode to Color) more details should be visible to the eye. As you can see in the image below, our image is now clearer, more natural and more detailed.
eye color after changing Blend Mode
Step 9: Select and adjust the layer mask
One of the best layer properties Adjustment in Photoshop is that they are equipped with a Layer Mask. Maybe you did not realize it yourself. But from the beginning of this tutorial and from the moment of adding the Hue/Saturation Adjustment layer, we are also using the Layer Mask. In fact, Photoshop automatically created a mask layer using the sections we selected with the Lasso Tool (Step 3). So, now we can see the thumbnail image of the mask layer from the Layers panel.
- Step-by-step tutorial on adding beards and mustaches in Photoshop
Make sure the mask layer is selected
as seen . Most parts of this thumbnail are covered in black and only 2 small dots are white. Black areas are areas where the Hue/Saturation Adjustment layer is not affected. In other words, the black sections still show the main color of your image. The two white dots you see are the same sections we selected in step three. Hue/Saturation settings only apply to these sections.
As you can see in the image below. A thin white box appears around the thumbnail. This means that we have selected the mask layer. If you do not see this box, click on the thumbnail to select the mask layer. Now let's move on to the next step.
- How to turn a photo into a drawing in Photoshop?
Step 10: Select the Brush tool h2>
If you feel that your initial choice using the Lasso Tool was not accurate, we need to correct it at this point. You may not have selected parts of the iris. Maybe you have chosen more parts by mistake and now you have changed the white color of the eye. We recommend zooming in completely on one eye to see all the details carefully. As you can see in the picture, we have overdone the selection a bit and an extra blue border has been created in the eye.
Parts of the eye are incorrectly colored
To delete these extra parts, all you have to do is Painting is a layer of a mask. Select the Brush tool.
Select the Font Tool
Step 11: Select Black
As we said, the black sections in the mask color layer show the original image. Therefore, choose black for your pen.
Tip: As in the photo You can see below. Photoshop allows you to choose 2 colors at the same time. One is called Foreground and the other is called Background. Pressing the D button resets the color settings and returns to the default black/white combination. The foreground color is at the top left, and the Background color is at the bottom right. Note that Photoshop uses Foreground color for the brush/pen tool.
You can also switch the two colors together with the x button.
Step 12: Paint the area around the iris black
Zoom in completely on each of the eyes and surround them with Draw carefully with a black pen. For best and more accurate results, we recommend that you do not choose a font size that is too large. You can select the font size using the [and] buttons. Right-clicking on the screen will also display a page for selecting font settings.
Paint around the iris black
Since we are painting on the mask layer, do not expect the parts you are painting to turn black! As we said, the black sections show the main settings and we just want to adjust and refine our mask layer.
In addition, we naturally do not want to color people's eyes! Therefore, using the same pen, click on the pupil (central black part of the eye) to return to its original and natural color.
Do the same for both eyes.
Click on the black center of the pupil with the same font
During the previous step, if you made a mistake and accidentally deleted part of the mask, you can change the white and black colors by pressing the X button. Now paint on the same area with a white pen to activate the mask again. When you have corrected the mistake, press the x button again to make the foreground black.
Of course, all the way, you can go back one step by pressing the Control + Z key.
color Comparison New eye color with new color
Disable the Hue/Saturation adjustment layer, as shown below, to compare the original color with the new color. By disabling this layer, you will see the original image. You can re-enable the layer to display the new color.
Primary eye color
New eye color
As you can see, changing eye color with Photoshop is not difficult. We did this using the Hue/Saturation Adjustment layer. But there are other ways to do this.
Source: PhotoshopEssentialsTags: step-by-step, tutorial, changing, eye, color, photoshop