A look at Anker’s first 3D printer; Very fast modeling

If for 3D printing, in addition to quality, speed is also an important parameter for you, Anker meets this need with its first 3D printer AnkerMake M5

BingMag.com A look at Anker’s first 3D printer; Very fast modeling

If for 3D printing, in addition to quality, speed is also an important parameter for you, Anker meets this need with its first 3D printer AnkerMake M5

When Anker announced that it was building a 3D printer, there was no guarantee that the company, known for making phone accessories and power banks, could make a good 3D printer from scratch.

But with the release of "AnkerMake M5", we can say that Anker can not only make a 3D printer, but this product can also be very promising.

The project AnkerMake M5 was originally launched as a Kickstarter campaign and managed to raise $8 million in funding. Backers of the project will receive their printers this week and will be available for everyone to purchase starting Tuesday.

The product is available for pre-order now for $799 for a December 1 release, with purchases at At this stage, you will also receive two rolls of filament and a 64GB flash memory.

First experience with AnkerMake M5

The first thing that attracts attention about AnkerMake is its easy installation. In fact, tightening a few screws to connect the gate to the base is the only thing you need to do before connecting and starting to work. The display guides you through various steps, including installing the app on the phone, and goes directly to the automatic leveling step. It's a super easy start, even if you've never used a 3D printer before.

BingMag.com A look at Anker’s first 3D printer; Very fast modeling

A few 3D printers have built-in Wi-Fi, and devices that have this feature often do not pay enough attention to it. Enkermic also has this feature, but sometimes its connection is interrupted and it is necessary to redo the entire settings in the program. But when it works well, it completely eliminates the need for USB drives.

AnkerMake M5 quality

As the old CNet logo printout shows, the M5 has very good print quality. has it. Dimensional accuracy is excellent and the protrusion and bridging test is also done very well. The only part that had a little problem were the two end parts, which were printed a little shaky due to the increased printing speed, and the rest of the threads were clear in them.

BingMag.com A look at Anker’s first 3D printer; Very fast modeling

All the rendered models look very nice and depending on the material used, the layer lines are evenly and cleanly distributed throughout the model. Even when printing some of the smaller parts, detail was clear with consistent layered lines throughout.

So the M5 is pretty much what you'd expect for a printer at this price, but it also has one highlight that most $800 printers don't have it, and that's the high speed of the device.

3D printing speed

M5 has a speed of 250mm/s with a maximum acceleration of 2500mm/s. In contrast, most of the best 3D printers available work at a speed of about 50 to 80 mm/s. So on paper, the M5 is about four to five times faster. Although in practice it is less than this amount, it still has a significant difference. The model with the same parameters in the Prusa Mk3 printer from the PrusaSlicer brand took about 27 hours and 13 minutes, but with the help of AnkerMake software, this time was reduced to less than half, only 11 hours and 17 minutes.

Controlling the printing process With the camera

Anker has done a great job by putting an AI-powered camera in the M5. This camera shows you a side view of the model being printed and with the app you can access it from anywhere.

Artificial intelligence detects when the print is damaged and thus gives you warns Even if this failure is high, it will stop printing. Although it still has flaws, it can be improved with a software update.

BingMag.com A look at Anker’s first 3D printer; Very fast modeling

One of the good features of the camera is that The M5 creates a timelapse of each print process that you can share with others. It may not be a professional time-lapse, and the angle isn't always perfect, but it's responsive enough to post on social media.

Overall Conclusion

What's really amazing about the AnkerMake 3D printer Its speed is half that of similar printers, while still offering the same quality as most printers in this price range.

BingMag.com A look at Anker’s first 3D printer; Very fast modeling

Of course, this does not mean that the device is perfect. In addition to the Wi-Fi issues mentioned above, more infill is required when printing at full speed. Without this there are gaps in some parts that the filament can't fill fast enough. At the same time, better results can be achieved with more experience. Therefore, we can say that the speed to That alone justifies the cost of the AnkerMake M5.

Photos: Modeling with the AnkerMake M5
Credit: James Bricknell/CNET

Leave a Reply

Your email address will not be published. Required fields are marked *