Home > Science and technology > Applications and software
Reading time estimate: 10 min

How to solve the problem of not booting the system?

BingMag.com <b>How</b> to <b>solve</b> the <b>problem</b> of not <b>booting</b> the system?

Have you ever wanted to log in but not boot? The reasons for this are different, but often this problem is caused by the motherboard. Since this problem is really annoying, we decided to examine three ways in which you can probably solve the problem of not booting your system.

Desktop systems are a big advantage over laptops That is, they allow users to fix a hardware problem at home, if possible, without the need for a hard drive. As a result, many homeowners often have to deal with a variety of system problems themselves without having to go to a repair shop or center like this. You need a professional repairman. Many problems can be solved at home and with the methods available on the Internet. But if you are one of those users whose system is very old, you have probably encountered the problem of not booting it several times. If not here's a new product just for you! But if this problem is bothering you and you do not know How to solve it, do not miss this article. Because we are going to look at three ways in which you can easily boot your system.

Note that these three methods are suitable for those whose system has not been seriously damaged. Some users try to open the computer because they think it is easy to repair, but this can sometimes cause the system to crash completely. Therefore, open the case door only when you are aware of its different parts. Otherwise, be sure to take the system to the appropriate service centers.

Keep in mind that these methods will not damage the system if implemented correctly. So if there is any problem, it will be the responsibility of the user.

What causes the system to not boot?

But before considering ways to Troubleshooting and solving the problem of the system not booting, it is better to look at the reasons for its occurrence so that, if possible, we will not let this problem bother us again next time. In general, problems in this area can be divided into three categories, which are:

  • Cable that is not well connected or damaged on the motherboard
  • UEFI)
  • Motherboard that has a problem
  • Parts that are not mounted correctly on the motherboard

If you have one of the above problems, chances are Do not boot your system too much. Therefore, it is recommended that you continue with us to use some (almost) definite methods to solve your problem. (At the end of the article, I personally offer you a series of solutions, because during several years of using the computer, this problem has occurred to me again and again, and each time there were different reasons for it).

Basic methods for troubleshooting motherboard

BingMag.com <b>How</b> to <b>solve</b> the <b>problem</b> of not <b>booting</b> the system?

Let's start with simple and basic methods and if We needed to resort to more complex methods. Because it may not be a serious problem at all and you do not need to go to the parts.

  • Motherboard Tester : These testers, which are mostly used by professionals, are codes Collect the motherboard error and make it available to the user. Troubleshooting with these codes will be easy.
  • Speaker: This very small piece mounts to a specific part of the motherboard and as soon as you press the power button Let the system turn on and boot, alert you to a problem with your system with all kinds of beeps. Each beep indicates a specific issue that needs to be addressed. Resets. This will often cause the system to return to normal.
  • Non-conductive surfaces: Some users try to use non-conductive materials such as cartons to assemble the system. Although this is a good way to fix this problem, we suggest that you, as a regular user, forget about it.

Troubleshooting process to fix system boot

Troubleshooting the motherboard officially begins at this stage. Start with the obvious. For example, check to see if all the components are mounted correctly on the board. Sometimes, for example, RAM or graphics are not fastened in place. Not too much pressure puts them where they need to be, and the system's booty just as easily. Next, if the system to you Allows you to enter the BIOS menu and see if a problem is reported. If necessary, reset the BIOS settings once to see if the issue is resolved.

BingMag.com <b>How</b> to <b>solve</b> the <b>problem</b> of not <b>booting</b> the system?

1. Check the connection of the wires

We said at the beginning that in many cases, a wire that is not connected properly can cause trouble. In general, many users who have this problem will eventually find that the problem is that one of the wires is not connected properly. So be sure to check the proper connection of the wires before the work is done instead of the narrow one.

In the next step, go to the parts. Note that a system needs four components to work properly to boot properly; Motherboard, a RAM stick, CPU and power supply. Some newer computers have graphics on either the motherboard or the processor itself, which helps prevent a number of problems that may arise from booting through separate graphics. If these parts are firmly in place and the wires are connected properly, enter the second phase of troubleshooting.

2. Check for physical damage

System components are very sensitive; In such a way that with the least pressure, they may fail. Therefore, when assembling or opening and closing for dusting, you must be very careful not to damage them. If you are a computer repair expert, you can remove the motherboard and look closely at its circuits to see if there is any evidence of physical damage.

In some very small cases, pressure Which enters the cables may damage the components. For example, if you have to put a lot of pressure on the case and yourself to connect or disconnect a simple cable like SATA because there is not enough space to do so, you may damage the components on the board.

BingMag.com <b>How</b> to <b>solve</b> the <b>problem</b> of not <b>booting</b> the system?

BIOS battery can also be one of the most important reasons why the system does not boot. You may be wondering, what is the purpose of this small piece of silver on motherboards? We have to say that the BIOS battery keeps all the settings of your system inside so that when the system turns off and on, you do not have to reset them. For example, your system date and time will work properly every time you turn it off. The main reason for this is the BIOS battery, which is doing its job properly. But sometimes the battery has to be removed to cast doubt on the so-called motherboard. In the following, we will teach you How to do this.

3. Resetting the motherboard

You must be patient to reset the motherboard. Of course, resetting it does not take much time, you have to wait a long time to see the result. To reset the motherboard settings, simply remove the battery and insert the jumper in the specified location and hold for a few minutes. Or insert the jumper and remove the battery and wait a day. But what happens when you do this?

  • Removing the battery: Each motherboard has its own push-pull lever to remove the BIOS battery. It jumps the battery up and detaches easily. By removing the battery and waiting for at least 10 minutes, the motherboard will reset to factory settings.
  • Jumpers: As mentioned above, using jumpers that are often Connects to a two-pin connector, you can reset the motherboard. Place the jumper in place and wait 10 minutes.
  • Full reset: To do this, remove the battery from the motherboard and place the jumper in place. Consider. Now wait for all the electricity inside the motherboard to be discharged. This operation is called discharging or discharging the motherboard.

4. Other methods that can be used to fix the problem of not booting the system

BingMag.com <b>How</b> to <b>solve</b> the <b>problem</b> of not <b>booting</b> the system?

As mentioned above, Personally, I have encountered many problems in preventing the computer from booting, each time having its own reasons. As a result, I decided to mention solutions that were effective in resolving all of these issues that ultimately prevented the system from booting.

  • The first thing you need to do is open the case door. And put all the pieces firmly in place. Check the CPU pins to see if the fan wire is mounted correctly on the motherboard. Note that in this process, the only wire that needs to be connected to the case is the power cord. Disconnect all other wires such as keyboard, mouse and from the case. Set the zero and one power switches on one and turn on the system.
  • If the problem persists, set the zero and one switches to zero and pull the power cord. Open the case lid, if you are using two RAM sticks, take one out one at a time and insert the other into all the sockets. With the slightest change you make at each step, Turn on the system once to see if it turns on. (If the system turns on/off but does not boot.)
  • If there was no problem with the RAM and RAM socket, see if the cable that connects to the monitor graphically is intact. If possible, check the system status with another cable (if the system turns on but does not boot).
  • If you are a professional system assembler, try the BIOS battery when the system is completely off. Is, disconnect from the motherboard. Wait 1 minute, after one minute, press and hold the power case key (not the power supply) for one minute (if the zero and one keys are on zero). After this one minute, press the power key several times. Wait 10 minutes in this position. Now turn on the system once without the battery and once with it.
  • Remove the graphics from the system and test the system using the graphics if the processor is using internal graphics./li>
  • If none of the above solve your problem, take the system to a service center to have each component inspected individually.

If the system You turn it on but it does not boot, by repeating the above methods you will probably get results. But in many cases, Rome caused the problem. But if the system does not turn on at all to reach the boot stage, there may be a problem with the power supply or processor. In many cases, according to personal experience, power for various reasons, such as sulfation and, causes the system to lose power and therefore does not turn on. But the problem could be because of the other things we mentioned above.

Have you had a similar experience? How did you solve the problem of your system not booting? If your methods have been effective in resolving this issue, be sure to share it with us in the comments section.

  • How to choose the right motherboard for your computer?

Source: MakeUseOf

READ NEXT IN: science and technology / applications and software

BingMag.com Get to know the 10 new features of Windows 11 update 22H2 applications and software

Microsoft has released the Windows 11 22H2 update for beta testers, which will be offered to all users of this operating system in the near future. But what new features does this update use? In the f

BingMag.com How to put shortcuts to sites on the Windows desktop? applications and software

By creating shortcuts to sites in the desktop environment, you can go to your desired sites with just two clicks. There are three different methods for this, and we will discuss all three methods belo

BingMag.com WhatsApp iOS will soon let you hide your online status and last visited applications and software

WhatsApp wants to soon add a feature to its iOS application, thanks to which you can hide your last visit and online status from others.

BingMag.com Introduction of 4 top text translation services; English to Persian translator and vice versa applications and software

In this article, we introduce 4 top text translation services (English to Farsi translator and vice versa) that you can give them different types of texts and translate Receive in different languages.