The Google Pixel 6 series of phones is a long way from the previous Pixel designs, and it looks like Google intends to apply the same look to its next phone. . Recently, the latest renders of the Google Pixel 6a phone have been circulated in cyberspace, and these images give us good information about its design and size. 6 show and there is not much difference between them. So Google will use the same Pixel 6 design language in this phone. Based on the available renderings, the Google Pixel 6a uses a protrusion on the back to house the cameras and LED flash, similar to that seen on the Google Pixel 6. It is very likely that the Pixel 6a will use the same dual color design, but these renderings cannot be looked at with certainty.
Another point mentioned in these renderings is the use of the display hole to host the selfie camera in the middle and top of the screen. Of course, we emphasize again that these renderings are not definitive and there may be changes in the design of this phone. There's also no physical fingerprint sensor on the back of the phone, and it looks like Google intends to use the sensor under the display on this phone.
Perhaps not the most significant change that has been made to this phone. 3.5 mm audio jack. This is something that will probably happen for the first time in the Google Pixel A series if Google approves it. Another interesting point that can be seen in the Google Pixel 6a renderings is the size of this phone. Apparently, this phone has dimensions of 152.2 by 71.8 by 8.7 mm, which looks a bit thicker with the protrusion of the camera. These dimensions indicate that the screen of this phone is about 6.2 inches or smaller, and compared to the Google Pixel 6, which measures 158.6 by 74.8 by 8.9 mm, it is significantly smaller in each dimension than It will be.
It should be noted that the Google Pixel 6a will also be smaller than the Pixel 5a, which measures 154.9 by 73.7 by 7.6 mm. This can be good news for many Google Pixel 6 and Pixel 6 Pro users who complain about its large screen. The price of this phone is not known yet. But it looks like Google Tensor's proprietary processor will be used in this phone.
The previous generation of these phones, the Google Pixel 5a, which was unveiled in August this year, is very similar to its predecessor, the Pixel 4a. This phone is 2.3 mm taller and 0.6 mm thicker than the 4a 5G pixel, and its width is 0.8 mm less than this phone, and it also weighs 15 grams more. One of the most important upgrades is the use of an integrated metal body, but the previous generation had a plastic body. Of course, on the metal body of this phone, there is also a plastic layer. Not to mention the headphone jack. Google has used Gorilla Glass 6 protective glass to protect the old 6.34-inch display of this phone, and of course, considering its 60Hz refresh rate, it has nothing to say to the competitors in this regard. On the upper left of the display is a selfie camera, and on the back panel is a 12.2-megapixel main camera and a 16-megapixel ultra-wide camera. The beating heart of this phone is the Snapdragon 765G chipset, along with 6 GB of RAM and 128 GB of internal memory.
It is powered by a 4680 mAh battery, which is a significant upgrade over the 3885 mAh 485 hp battery. It should be noted that this is the largest battery among all Pixel phones, but there is no news of wireless charging support.
It is also not bad to know that Google intends to use the second generation tensor chipset as the beating heart of the Pixel 7 series phones But it seems unlikely that the Google Pixel 6a will also have a stake in the second-generation Google Tensor proprietary processor. The second-generation tensor processor is expected to deliver faster performance and even more impressive AI capabilities than the previous generation.