Dissection video of Xiaomi 12S Ultra; How big is a 1 inch sensor really?
If the question arises for you, How big is the 1-inch sensor of Xiaomi 12S Ultra that the company had to consider such a module for this phone, then don't miss the Dissection video of this product.
Xiaomi 12S Ultra is one of the best phones of 2022 and currently, it is the best and most powerful product that Xiaomi has unveiled and launched in the market. Of course, this phone has another "best" and that is the use of the largest camera sensor that has ever been used in a smartphone. We have seen, but the sensor used in Xiaomi 12S Ultra is better than all other samples in terms of quality. In order to be able to install this giant sensor in its phone, Xiaomi has installed a large module on the back panel to somehow draw the attention of users to the fact that its $1,000 phone is supposed to be unique in terms of photography and videography.
When such a sensor is used inside a phone and we see such a module on the back panel, our mind inadvertently goes to the direction of How big is a 1-inch sensor? If this question has arisen for you, it is suggested that you do not miss the Xiaomi 12S Ultra Dissection video, because in it you are supposed to get to know the size of all the parts used in this product.
If you pay attention to the video, you will see that Xiaomi had to design this phone to increase the periscope camera with 5x zoom as much as possible. paste wide But again, with the addition of the main camera, it can almost be said that half of the space above the battery is occupied only by the sensors, and as a result, there is little space for the motherboard; The board on which the Snapdragon 8 Plus generation 1 is placed.
On the other hand, the battery of this phone has a capacity of 4860 mAh. Considering the approximately 6.7-inch size of this phone, we are left wondering How the company has put the internal components together to be able to use such a relatively large battery in it. Of course, we must say that we know what design the Chinese company used. As you can see from the video, Xiaomi has decided to stack the printed circuit boards so that there is enough space for other parts. For example, the RAM, chip and internal memory are located under the layer, and a layer of thermal paste, copper layers and a custom vapor chamber are intended for them to spread the heat produced by them throughout the phone.
It may be interesting, but you should know that only the thickness of the Xiaomi 12S Ultra camera module is 11.06 mm, which is only the thickness of many flagships. Considering the camera module is bigger. Therefore, it seems that Xiaomi had no choice but to equip this phone with such a large module and it should have done this to protect the lenses. Approximately 50 MB, placed above.
Source: GSMArena
