Home > Gaming > Game news
Reading time estimate: 4 min

Guide to adding user memory to PlayStation 5

BingMag.com Guide to adding user memory to PlayStation 5

A few days ago, Sony finally released a major software update for the PlayStation 5 console. One of the most important features of this update is that it allows you to install and add M2 (M.2 SSD) internal SSD memory for the console. If you are wondering how to add purchased storage memory to a console, read on.

One of the major developments of this generation of home consoles is the addition of built-in storage ( SSD) was to them. Especially Sony, which focused on this feature due to the extremely high speed of the PlayStation 5 console. However, since the console has 825 GB of internal memory and only about 667 GB is available to the audience, you may need to increase the console's internal memory in the next generation. However, this is up to you and the management of the console's memory space.

Since SSDs are not cheap, some may want to use external storage to address some of the potential problem of downsizing the next generation. Internal memory has other benefits as well. By adding M.2 SSD internal memory, you can directly download, copy and run PlayStation 5 and PlayStation 4 games on this memory, thus increasing the size of the console's internal memory and making your work easier. External hard drive does not allow you to do this and you must copy the game to the internal memory to run the games.

How to internal memory M.2 SSD < Add to the console?

Touch a metal object to remove any static electricity from your body before installing or removing it. Failure to do so may damage your M.2 SSD or console.

If this is the first time you want to connect your M.2 SSD to the console, you should consider Installing Memory on the Console Your new M.2 SSD will be formatted to be usable on the PlayStation 5 console. So be careful that there is no important information on it that will be lost if neglected. Also, make sure that the heatsink is connected to a file that is most likely already connected.

We have shown the steps below, step by step and with an image. But do not be fooled by the long steps and the final task is much easier, but here we have tried to explain step by step and in fine detail. You will also need a screwdriver to install this internal storage. The storage must be M.2 SSD. The M.2 SATA SSD is not supported and cannot be used as internal storage. You can find it here for full details.

Steps to add internal storage M.2 SSD

  • to your console Turn off completely and disconnect all cables and devices from PlayStation 5 and wait for a while.
  • Place your PS5 console on a flat surface with a protective cover and remove the base.
  • Position your PS5 console so that the PS logo is facing down and the power button is facing you. Use the left corner of the cover and the PlayStation 5 cover and gently remove the cover from the console. BingMag.com Guide to adding user memory to PlayStation 5
  • There is a long rectangular cover on the place for the 2 SSD compartment which is fastened with a screw. Using a screwdriver, loosen the screw and place it in a safe place so that it does not get lost, and remove the top cover of the housing. Be careful not to slip the screw into the console fan. BingMag.com Guide to adding user memory to PlayStation 5
  • Carefully remove the screw (B) as shown below Move C) to the corresponding slot according to your size. BingMag.com Guide to adding user memory to PlayStation 5
  • Place the edge of the 2 SSDs on the surface of the case According to the size according to the picture, put it completely in the container. Make sure that the document is inserted correctly and that nothing prevents it. BingMag.com Guide to adding user memory to PlayStation 5
  • Hold the document and replace it with a screw Tighten. Make sure that the cooling system does not obstruct the screw. Set aside, close again, and tighten.
  • Reconnect the console cover and cover. BingMag.com Guide to adding user memory to PlayStation 5
  • Reconnect the console cables and turn them on after a while. Follow the instructions to format the 2 SSD memory and prepare it for use on the console.
  • How to install games and applications in this added memory?

    Settings section of the console, then the Storage section, and then the Installation Location section. . Here you can choose to download games to this memory.

    To transfer games and applications that are already installed, follow these steps:

  • Go to the Games and Library section Go to your game list ( Game Library ).
  • Select the data you want to transfer, then press the Options button, then select the option to transfer games and applications ( Select Move Games and Apps ).

  • Source: PlayStation

    READ NEXT IN: gaming / game news

    BingMag.com How did the famous Scorpio move in Mortal Kombat come about? game news

    As we approach the 30th anniversary of the Mortal Kombat fighting game series. That's why Ed Boone, the director and co-creator of the game, posted a video on Twitter revealing how Scorpio created a s

    BingMag.com God of War will be released for PC in January game news

    Following the release of some of the exclusive PlayStation games on PC, this time it is God Of War./p>

    BingMag.com A new cell splitter is on its way; But not so soon game news

    According to new rumors, it seems that Ubisoft, after a decade, has finally licensed a new game from the Splinter Cell series. Cell)

    BingMag.com Steam banned the release of any blockchain or NFT-related games game news

    Recently, Steam has blocked all games that use cryptocurrencies (NFT) in its digital store and allowed Does not allow them to be present.